The following is an example command for FastEthernet0/0 with IP address 192.168.1.111/24 and the file name of the IOS image file on the flash memory is “”. Then, use the tftp-server command to enable TFTP download of the IOS file on the flash memory. First, set the IP address of the interface that is connected to the PC, and any value for the IP address can be used as long as it allows communication with the PC. Configure the real router as a TFTP serverĬonfigure the real router as a TFTP server. It will vary depending on the actual router. The router interface name is FastEthernet0/0 (Fa0/0) as an example. Or, connect the Ethernet interface of the router and the PC through a switching hub. When the Ethernet interface is not up, wire it with a cross cable. Since you need to configure the router, you also need to connect the console. Connect the Ethernet interface of the router and PC with a UTP cable. Wire the actual router and PC to which you want to download IOS. Download IOS with your PC TFTP client Wiring the real router to the PC.Configure the real router as a TFTP server.The steps to download IOS of the real router to your PC are as follows How to download IOS of the real router to your PC Modern PCs don’t have a serial port, so a console cable that connects directly to the USB port would be useful. Your PC will need a wired Ethernet interface. Here’s what you’ll need to download the IOS of the real router to your PC How to Stream iPhone Screen on PC - Free & 1080p Advance preparations

Ios cisco gns3 download